Grand Prix V6-191 3.1L VIN M SFI (1998)
4. Install the throttle body retaining nuts and bolts (3).
-
Tighten the throttle body retaining nuts and bolts to 28 Nm (21 lb ft).
5. Install the heater pipe nut at the throttle body.
6. Install the throttle body coolant bypass hoses.
7. Install the IAC valve, and TP sensor, electrical connectors.
8. Install the accelerator control cable bracket.
9. Install the accelerator control and cruise control cables.
10. Install the PCV hose.
11. Install the air intake tube.
12. Refill the coolant.
Important: The throttle should operate freely without binding between full closed and wide open throttle.
13. Inspect and check for complete throttle opening and closing positions by operating the accelerator pedal. Also check for poor carpet fit under the
accelerator pedal.
