Grand Prix V6-191 3.1L VIN M SFI (1998)
Manifold Absolute Pressure (MAP) Sensor: Service and Repair
MAP Sensor Service
REMOVE OR DISCONNECT
1. Disconnect the negative battery cable.
2. Remove the bolts / screws (2)
3. Remove the electrical connector.
4. Remove the inlet vacuum hose.
5. Remove the MAP sensor from the bracket
INSTALL OR CONNECT
1. Installation the inlet vacuum hose.
2. Connect the electrical connector.
3. Position the MAP sensor to bracket and drive bolt/screws (2) securely seated and not stripped.
4. Connect the negative battery cable.
