Grand Prix V6-191 3.1L VIN M SFI (1998)
Description
1. Install the belt retractor into the T-slot in the center pillar.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the retractor side belt bolt.
Tighten
Tighten the retractor side belt bolt to 42 N.m (31 lb. ft).
3. Install the intermediate guide bolts.
Tighten
Tighten the intermediate guide bolts to 10 N.m (89 lb. in).
4. Position the anchor plate to the seat stud.
5. Install the anchor plate nut to the seat stud.
Tighten
Tighten the anchor plate nut to 42 N.m (31 lb. ft).
6. Install the center pillar lower trim. Refer to Center Pillar Lower Trim Panel in Doors.
7. Position the guide loop to the guide adjuster bracket.
8. Install the guide loop nut.
Tighten
Tighten the guide loop nut to 42 N.m (31 lb. ft).
9. Close the guide loop cover.
Coupe
1. Install the belt retractor into the T-slot in the quarter lower trim finish panel.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the retractor side belt bolt.
Tighten
Tighten the retractor side belt bolt to 42 N.m (31 lb. ft).
3. Install the anchor plate to the seat stud.
4. Install the anchor plate nut to the seat stud.
Tighten
Tighten the anchor plate nut to 42 N.m (31 lb. ft).
5. Install the intermediate guide bolts.
Tighten
Tighten the intermediate guide bolts to 10 N.m (89 lb. in).
6. Install the quarter lower finish trim panel. Refer to Quarter Lower Trim in Rear Quarters.
7. Install the quarter upper finish trim panel. Refer to Quarter Upper Trim in Rear Quarters.
8. Position the guide loop to the quarter upper trim panel.
9. Install the guide loop bolt.
Tighten
Tighten the guide loop bolt to 42 N.m (31 lb ft).
10. Close the guide loop cover.
11. Install the rear window trim panel. Refer to Rear Window Trim Panel in Body Rear End.
12. Install the rear seat back and the cushion. Refer to Rear Seat Back in Seats and Carpet.
