Grand Prix V6-191 3.1L VIN M SFI (1998)
Important: This may require turning the wheels from side to side up to 40 times. Keep the power steering fluid level at the FULL COLD mark.
Power steering fluid with air in it has a light tan appearance. This air must be eliminated from the power steering fluid before normal steering
action can be obtained.
4. Start the engine. With the engine idling, recheck the power steering fluid level. If necessary, add power steering fluid to bring the level to the
FULL COLD mark.
5. Return the wheels to the center position. Lower front wheels to the ground. Continue running the engine for two or three minutes.
6. Test the vehicle to be sure the steering functions normally and is free from noise.
Important: Inspect for power steering fluid leakage at connection points along the power steering system.
7. Recheck the power steering fluid level as described in Steps 3 and 4 except that the power steering fluid level should now be up to the FULL HOT
mark after the system has stabilized at its normal operating temperature.
