Grand Prix V6-191 3.1L VIN M SFI (1998)
Fluid Line/Hose: Service and Repair
Automatic Transmission Oil Cooler Hose Replacement
REMOVAL PROCEDURE
NOTICE: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid
loss.
1. Raise and support the vehicle.
2. Position the drain pan.
3. Remove the transaxle oil cooler hoses from the transaxle oil cooler fittings in the transaxle.
4. Remove the transaxle oil cooler clamps from the transaxle oil cooler hoses at the transaxle oil cooler or the quick connect transaxle oil cooler
pipes to the radiator Automatic Transmission. Oil Cooler Pipes Replacement (With Quick Connect Fittings).
5. Remove the transaxle oil cooler hoses from the transaxle oil cooler pipes at the radiator.
6. Remove the transaxle oil cooler hose clip bolt.
7. Remove the transaxle oil cooler hoses.
INSTALLATION PROCEDURE
