Grand Prix V6-191 3.1L VIN M SFI (1998)
Wiper Arm: Service and Repair
Wiper Arm Replacement
REMOVAL PROCEDURE
1. Turn the ignition switch to the ACCY position.
2. Set the wiper switch to the PULSE position.
3. Turn the ignition oft when wiper arms are at the bottom of the wipe pattern (innerwipe) and not moving.
4. Remove the washer hose from the washer nozzle.
5. Remove the cover from the nut.
6. Remove the nut from the wiper arm assembly and the wiper transmission assembly drive shaft.
IMPORTANT: A J 39822 Wiper Arm Puller may be used if the wiper arm assembly cannot be removed from wiper transmission assembly drive
shaft by rocking. The pin from the new wiper arm assembly may be used to ease removal.
7. Remove the wiper arm assembly from the wiper transmission assembly drive shaft by rocking.
8. Remove the wiper blade assembly from wiper arm assembly.
8.1. Push in the button of the wiper blade assembly clip and remove the wiper blade assembly from inside radius of wiper arm assembly.
8.2. Bring the wiper arm assembly out through the opening in the wiper blade assembly.
INSTALLATION PROCEDURE
