Grand Prix V6-204 3.4L DOHC (1992)
It is important that you clean all debris from the oil passage hole, failure to do so could result in a premature engine failure.
31.
Install the new cup plugs provided with the kit into the end of the camshafts. One way of doing this is to place the cup plug onto a socket, use a
pair of pliers to grip the socket and tap the socket with a hammer to set the cup plug. The plug will bottom out on a shoulder in the hole of the
camshaft (Figure 5).
32.
Install a new cover gasket provided with the kit, tighten bolts to 10 N.m (89 lb in.).
CAM Carrier Thrust Plate Rear Cover
Left Side (Front)
Remove or Disconnect
33.
Upper radiator hose.
34.
Exhaust crossover pipe.
35.
Heater pipe assembly from coolant pump to upper intake manifold.
36.
Thermostat housing.
37.
Engine torque strut.
38.
Engine lift support.
39.
Cam carrier rear cover mounting bolt/screw.