Grand Prix V6-204 3.4L DOHC (1992)
Power Window Switch: Service and Repair
Coupe
Power Switch Assembly Removal
NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the off position. This will eliminate the possibility of
shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.
Remove or Disconnect
1. Screws from switch plate assembly.
2. Switch plate assembly from trim panel.
3. Retainer(s) from connector(s).
4. Connectors.
5. Door trim panel. Refer to "Trim Panel" in this section.
6. Express down module from trim panel.
Install or Connect
1. Express down module to door trim panel.
2. Door trim panel. Refer to "Trim Panel" in this section.
3. Connectors.
4. Retainer(s) to connector(s).
5. Switch plate assembly to trim panel cutout. Press firmly to secure.
6. Screws to switch plate assembly.
