pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

3T40 (125C) Automatic Transaxle|Page 3572 > < 3T40 (125C) Automatic Transaxle|Page 3570
Page 6
background image

^

Nuts to 43 Nm (32 lb. ft.).

CAUTION:  When installing the intermediate shaft make sure the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted
into the coupling before shaft Installation, the two mating shafts may disengage.

7. Pinch bolt at intermediate steering shaft.
8. Splash shield.
9. Tire and wheel assembly.

10. Lower vehicle.
11. Left-hand torque strut bracket to power steering bracket.
12. Transaxle bracket top bolt.

TIGHTEN

^

Bolt to 48 Nm (35 lb. ft.).

13. Remove J 28467-A and J 36462.
14. Negative battery cable.
15. Air cleaner.

3T40 (125C) Automatic Transaxle|Page 3572 > < 3T40 (125C) Automatic Transaxle|Page 3570