Grand Prix V6-204 3.4L DOHC (1992)
TIGHTEN
^
Nuts to 43 Nm (32 lb. ft.).
CAUTION: When installing the intermediate shaft make sure the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted
into the coupling before shaft installation, the two mating shafts may disengage.
7. Pinch bolt at intermediate steering shaft.
8. Splash shield.
9. Tire and wheel assembly.
10. Lower vehicle.
11. Bolts at top of transaxle mount bracket.
TIGHTEN
^
Bolts to 83 Nm (61 lb. ft.).
12. Remove J 28467-A, J 28467-90 and J 36462.
13. Negative battery cable.
14. Air cleaner assembly.
