Grand Prix V6-204 3.4L DOHC (1992)
Throttle Valve Cable/Linkage: Adjustments
Hydra-Matic 125C (3T40)
MODELS w/LOCK TAB ADJUSTING CABLE
Fig. 4 Detent/TV Cable Adjuster. Models w/Lock Tab Adjusting Cable
1.
Depress and hold re-adjust tab, Fig. 4.
2.
Move slider back through fitting in direction away from throttle idler lever until slider stops against fitting, then release re-adjust tab.
3.
On all except Cutlass Calais, Grand Am and Skylark models with 2.5L/4-151 engine, rotate throttle idler lever to full travel stop position,
then release throttle lever.
4.
On Cutlass Calais, Grand Am and Skylark models with 2.5L/4-151 engine, press accelerator pedal to full travel, then release accelerator
pedal.
MODELS LESS LOCK TAB ADJUSTING CABLE
Except 3.3L/V6-204
Fig. 5 Detent/TV Cable Adjustment. Except 3.3L/V6-204
1.
Ensure cable is in ``Non-Adjusted'' position as shown, Fig. 5.
2.
Using a suitable torque wrench, rotate idler pulley counterclockwise to 65 inch lbs. on all except Cutlass Calais, Grand Am and Skylark models, or
75 inch lbs. on Cutlass Calais, Grand Am and Skylark models.
3.
Ensure cable moves freely, then test drive vehicle.
3.3L/V6-204
