Grand Prix V6-204 3.4L DOHC VIN X SFI (1995)
7. Heater hose at lower intake manifold.
8. PCV valve and vacuum line at throttle body of upper intake.
9. Electrical Connectors:
^
AIR solenoid.
^
EGR valve.
^
Throttle position sensor.
10. EGR bolts.
11. EGR valve at upper intake.
^
Set aside.
12. Fuel line bracket at throttle body of upper intake.
13. Loosen throttle body heater hose clamp at upper intake.
14. Electrical connectors:
^
Canister purge solenoid.
^
Map sensor.
15. Vacuum hoses at vacuum tee on upper intake.
16. Wiring loom bracket for rear bank spark plug wires.
17. Nuts at upper intake manifold support bracket.
18. Upper intake manifold bolts.
19. Upper intake manifold.
CLEAN
^
Gasket material from mating surfaces.
INSTALL OR CONNECT
1. Upper intake manifold and gasket.
2. Upper intake manifold bolts. Tighten bolts to 27 Nm (20 lb. ft.).
3. Nuts at upper intake manifold support bracket. Tighten nuts to 27 Nm (20 lb. ft.).
4. Wiring loom bracket for rear bank spark plug wires.
5. Vacuum hoses at vacuum tee on upper intake.
6. Electrical connectors:
^
Canister purge solenoid.
^
Map sensor.
7. Tighten throttle body heater hose clamp at upper intake.
8. Fuel line bracket at throttle body of upper intake.
9. EGR valve at upper intake.
10. EGR bolts.
11. Electrical connectors:
^
AIR solenoid.
^
EGR valve.
^
Throttle position sensor.
12. PCV valve and vacuum line at throttle body of upper intake.
13. Heater hose at lower intake manifold.
14. Fuel pipes at fuel rail.
15. Fuel rail cover.
16. Fuel rail cover bolts.
17. Control cables at throttle body of upper intake.
18. Refill coolant.
19. Air cleaner.
