Grand Prix V6-204 3.4L DOHC VIN X SFI (1995)
Install or Connect
Notice: Do not bend, kink, or pry on camshaft timing belt as damage may occur.
1. Camshaft timing belt by routing it around sprockets and idlers.
A. Start at intermediate camshaft sprocket and work counterclockwise when looking at front of engine.
B. Make sure not to accumulate slack in belt as you work belt around sprockets.
2. Tensioner pulley.
A. Use a flat magnet, tape or cup plug to hold pivot tube in pulley.
B. Install the pulley and remove the flat magnet, tape, or cup plug.
C. Start tensioner pulley bolt. Tighten tensioner pulley bolt to 15 Nm (11 ft. lbs.) plus 40° using J36660, or tensioner pulley bolt to 50 Nm (37 ft.
