pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Diagnostic Trouble Code Tests and Associated Procedures|Page 10391 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 10389
Page 12
background image

Symptom Table (Part 1 Of 2)

Symptom Table (Part 2 Of 2)

Troubleshooting Hints

1. Check Fuse 10, Fuse 30, Fuse 39 and PARK LPS Fuses.
2. Check that grounds G201, G203, G301 and G302 are clean and tight.
^

Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove 

"GOOD" in a

continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be
checked by monitoring for a voltage drop with the system operational (under load).

^

Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to 

General

Troubleshooting Procedures).  See: Diagrams/Diagnostic Aids

^

Refer to 

System Diagnosis.  See: Diagnostic Trouble Code Tests and Associated Procedures/System Diagnosis

Diagnostic Trouble Code Tests and Associated Procedures|Page 10391 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 10389