Grand Prix V6-204 3.4L DOHC VIN X SFI (1995)
![background image](/pontiac/grand_prix/v6-204_3.4l_dohc_vin_x_sfi/Page-1285024.png)
Proper First Taping
Step 6: Tape the Splice
Center and roll the splicing tape. The tape should cover the entire splice. Roll on enough tape to duplicate the thickness of the insulation on the
existing wires. Do not flag the tape. Flagged tape may not provide enough insulation, and the flagged ends will tangle with the other wires in the
harness.
Proper Second Taping
If the wire does not belong in a conduit or other harness covering, tape the wire again. Use a winding motion to cover the first piece of tape.
Splicing Twisted/Shielded Cable