Grand Prix V6-204 3.4L DOHC VIN X SFI (1995)
4. Stud. Tighten to 50 Nm (37 ft lb).
5. Alternator. Refer to "Alternator Assembly Replacement".
Alternator Cooling Duct
Generator Cooling Duct.
REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Exhaust converter assembly.
3. Retaining bracket at oil pan.
4. Generator cooling duct.
INSTALL OR CONNECT
1. Position generator cooling duct.
2. Retaining bracket at oil pan.
3. Slide cooling duct onto bracket, then snap duct into generator.
4. Exhaust convener assembly.
5. Lower vehicle.
Alternator Splash Shield - to Transaxle Mount Bracket
