pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Door Locks|Page 11538 > < Door Locks|Page 11536
Page 4
background image

1. Position speaker to housing.
2. Screws.

Tighten
^

Screws to 2 N.m (18 lb. in.).

3. Electrical connector clip to speaker housing.
4. Electrical connector.
5. Screws.

Tighten
^

Screws to 2 N.m (18 lb. in.).

6. Trim panel.

Door Window Down Stop Bumper

Door Window Down Stop Bumper

Remove or Disconnect

1. Door trim panel.
2. Water deflector.
3. Down stop bumper by raising window to full-up position, grasping down stop bumper, twisting and lifting bumper from door.

Install or Connect

1. Down stop bumper by pressing and twisting the. bumper in place.
2. Water deflector.
3. Door trim panel.

Inside Handle

Door Locks|Page 11538 > < Door Locks|Page 11536