pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Door Locks|Page 11543 > < Door Locks|Page 11541
Page 9
background image

Mirror Bezel Assembly

Remove or Disconnect

1. Rearview mirror remote control from bezel (driver-side only).
2. Door trim panel.
3. Nut.
4. Bezel.

Install or Connect

1. Bezel.
2. Nut.

Tighten
^

Nut to 2 N.m (18 lb. in.).

3. Door trim panel.
4. Rearview mirror remote control (driver-side only).

Spring Clips

Spring clips are used to secure handle connecting rods and inside locking rods to door lock levers in coupe. A slot in the clip provides for disengagement
of the rod.

Remove or Disconnect

1. Clip from lever by using a scratch awl, pick or other thin-bladed tool and sliding clip out of engagement.
2. Rod from clip by pulling rod out of clip.

Install or Connect

1. Clip to lever by pressing clip fully on lever.
2. Rod to lever by pressing rod through hole in lever until fully engaged by clip.

Stabilizer

Door Locks|Page 11543 > < Door Locks|Page 11541