Grand Prix V6-3.1L VIN J (2000)
Tighten the front bumper fascia to front fender liner screws to 2 N.m (18 lb in).
5. Install the bolt to the front bumper fascia upper support.
Tighten front bumper fascia upper support bolt to 7 N.m (61 lb in).
6. Install the push-in retainers to the front bumper fascia radiator air baffle.
7. Install the fog lamps. Refer to Front Fog Lamp Replacement, if equipped.
8. Install the headlight. Refer to Headlamp Assembly or Headlamp Bulb Replacement.
9. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) in General Information.
10. Remove the protective tape that may have been applied during the removal procedure.