Grand Prix V6-3.1L VIN J (2000)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Rear Compartment Lid Lock Actuator Replacement
Removal
1. Open the rear compartment lid.
2. Disconnect the electrical connector from the lock actuator.
3. Remove the screws retaining the lock actuator to the rear compartment lid latch.
4. Remove the lock actuator from the rear compartment lid latch.
Installation
1. Align the lock actuator to the rear compartment lid latch.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the lock actuator.
Tighten the lock actuator screws to 3 N.m (26 lb in).
3. Connect the electrical connector to the lock actuator.
4. Close the rear compartment lid.
