Grand Prix V6-3.1L VIN J (2000)
17. Lower the vehicle until the frame contacts the J 39580 .
18. Remove and DISCARD the front frame-to-body bolts.
19. Remove and DISCARD the rear frame-to-body bolts.
20. Raise the vehicle in order to separate the frame from the body.
21. If you are replacing the frame, remove the following components:
*
Both of the lower control arms. Refer to Lower Control Arm Replacement.
*
The stabilizer shaft. Refer to Stabilizer Shaft Replacement.
*
The spacers, the upper insulator, the lower insulator, and the retainers. Refer to Front Frame Cushion or Insulator Replacement (See: Body /
Frame Mount Bushing/Service and Repair/Front Frame Cushion or Insulator Replacement) and to Rear Frame Cushion or Insulator
Replacement (See: Body / Frame Mount Bushing/Service and Repair/Rear Frame Cushion or Insulator Replacement) .
Installation Procedure
