Grand Prix V6-3.1L VIN J (2000)
Sun Visor: Service and Repair
Sunshade Replacement
Sunshade Replacement
The sunshades may be equipped with an illuminated vanity mirror. The illuminated vanity mirror is not serviced as a separate unit.
Removal Procedure
1. Remove the screws from the sunshade mounting plate.
2. Remove the sunshade.
3. Disconnect the electrical connector from the sunshade, if equipped.
4. Remove the sunshade anchor from the roof by unsnapping, if needed.
Installation Procedure
1. Install the sunshade anchor by pressing into place until fully seated, if removed.
2. Connect the electrical connector to the sunshade, if equipped.
3. Position the sunshade to the roof.
Notice: Refer to Fastener Notice .
4. Install the screws to the sunshade.
Tighten the sunshade screws to 3 N.m (27 lb in).
