Grand Prix V6-3.1L VIN J (2000)
5. Disconnect the master cylinder brake pipes (1) from the BPMV (2).
6. Remove the two nuts (1) that connect the BPMV to the BPMV bracket.
Notice: When removing the brake pressure modulator valve, protect the vehicle exterior from possible brake fluid spillage. Brake fluid can cause
damage to painted surfaces.
7. Remove the BPMV (2) and EBTCM as an assembly from the vehicle.
8. Remove EBTCM if replacing the BPMV only. Refer to EBTCM Replacement.
Installation Procedure
1. Install EBTCM if replacing the BPMV only. Refer to EBTCM Replacement.
2. Install BPMV (2) and EBTCM as an assembly into the BPMV bracket. Align the flats of the studs on the BPMV with the BPMV bracket.
