Grand Prix V6-3.1L VIN J (2000)
1. Install the left exhaust manifold gasket.
2. Install the left exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the left exhaust manifold nuts.
^
Tighten the left exhaust manifold nuts to 16 Nm (12 ft. lbs.).
4. Install the left exhaust manifold heat shield.
5. Install the left exhaust manifold heat shield bolts.
^
Tighten the left exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).
6. Install the exhaust crossover pipe nuts to the left exhaust manifold. Refer to Exhaust Crossover Pipe Replacement.
7. Install the exhaust crossover pipe heat shield. Refer to Exhaust Crossover Pipe Replacement.
8. Install the right engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement (Upper Radiator Support) or Engine Mount Strut
Bracket Replacement (Left) or Engine Mount Strut Bracket Replacement (Right).
9. Install the throttle body air inlet duct.
10. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
