Grand Prix V6-3.1L VIN J (2000)
4. Place the J 33023-A on the clutch rotor.
5. Install the J 41552 down into the inner circle of slots in the rotor.
Turn the compressor pulley puller clockwise in the slots to engage the puller tangs with the rotor.
6. Hold the compressor pulley puller in place and use a wrench to turn the center forcing screw against the puller pilot to remove the clutch rotor and
bearing assembly.
V5 - Conventional Mount
TOOLS REQUIRED
^
J 6083 Snap Ring Pliers #24 External
^
J 9398 Rotor Bearing Remover
^
J 8092 Driver Handle
^
J 33020 Pulley Puller
^
J 33023-A Puller Pilot
1. Remove the clutch plate and hub assembly.
