Grand Prix V6-3.1L VIN J (2000)
6. Remove the spark plug wires from the ignition coils.
7. Remove the spark plug wires from the engine.
8. If replacing the spark plug wires, transfer any of the following:
^
Boot heat shields
^
Spark plug wire conduit
^
Spark plug wire retaining clips
INSTALLATION PROCEDURE
1. Position the spark plug wire(s) to the engine.
2. Install the spark plug wires to the ignition coils in the proper position.
3. Install the spark plug wires (1,3,5) to the rear spark plugs.
4. Install the spark plug wire retaining clips from the rear of the engine.
