Grand Prix V6-3.1L VIN J (2000)
Transmission Position Switch/Sensor: Service and Repair
Removal Procedure
1. Apply the parking brake.
2. Block the wheels.
3. Place the vehicle is the Neutral position.
4. Remove the throttle body air inlet duct. Refer to one of the following procedures:
^
Air Cleaner Assembly Replacement in Powertrain Management
5. Remove the automatic transaxle range selector cable.
6. Remove the wiring harness connectors.
7. Remove the automatic transaxle range selector lever. Refer to Automatic Transmission Range Selector Cable Lever Replacement.
8. Remove the PNP switch mounting bolts.
9. Remove the PNP switch.
Installation Procedure
^
Tool Required
-
J 41545 Park/Neutral Switch Alignment Tool
