Grand Prix V6-3.1L VIN J (2000)
Mass Air Flow (MAF) Sensor: Service and Repair
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the IAT sensor electrical connector.
3. Disconnect the MAF sensor electrical connector.
4. Remove the air inlet duct from the MAF sensor and the throttle body.
5. Remove the MAF sensor (1) from air filter housing.
INSTALLATION PROCEDURE
1. Carefully install MAF sensor (1) to air inlet grommet.
2. Attach the MAF sensor to air inlet duct and install the air inlet duct.
3. Connect the MAF sensor electrical connector.
4. Connect the IAT sensor electrical connector.
