Grand Prix V6-3.1L VIN J (2000)
Vehicle Speed Sensor: Service and Repair
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation in Steering and Suspension.
3. Remove the right engine splash shield. Refer to Splash Shield Replacement - Engine in Body and Frame.
4. Remove the vehicle speed sensor wiring harness connector.
5. Remove the vehicle speed sensor bolt (9).
6. Remove the vehicle speed sensor (10) from the extension case.
7. Remove the O-ring (11) from the vehicle speed sensor (10).
Installation Procedure