Grand Prix V6-3.1L VIN J (2000)
Traction Control Switch: Service and Repair
Removal Procedure
1. Open the console storage lid.
2. Ensure the cup holder is in the open position.
3. Remove the front floor console trim plate bolts.
4. Remove the front floor console trim plate.
5. Disconnect the wiring harness from the traction control switch.
6. Remove the traction control switch from the front floor console trim plate.
Installation Procedure
1. Install the traction control switch to the front floor console trim plate.
2. Connect the wiring harness to the traction control switch.