Grand Prix V6-3.1L VIN J (2000)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement - Front
Removal Procedure
1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Disconnect the front wheel speed sensor jumper harness connector from the ABS harness connector (1).
3. Remove the front wheel speed sensor jumper harness (2) from the control arm retaining clips (3).
4. Disconnect the front wheel speed jumper harness connector (1) from the front wheel speed sensor connector (3).
5. Remove the front wheel speed sensor jumper harness (2) from the vehicle.
Installation Procedure
1. Connect the front wheel speed sensor jumper harness connector (1) to the front wheel speed sensor connector (3).