Grand Prix V6-3.1L VIN J (2000)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement - Rear
Removal Procedure
1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Disconnect the rear wheel speed jumper harness connector at the pass through connector.
3. Remove the rear wheel speed sensor jumper harness (1) from the retaining clips (2).
4. Disconnect the rear wheel speed sensor jumper harness connector (1) from the wheel speed sensor, located next to the rear strut (2).
5. Remove the rear wheel speed sensor jumper harness.
Installation Procedure
1. Connect the rear wheel speed sensor jumper harness connector (1) to the wheel speed sensor, located next to the rear strut (2).