pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Turn Signal Cancel Can|Page 1094
Page 3
background image

6. Install the wire harness assembly (1) to the steering column wire harness straps (2).
7. Install the steering column trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.
8. Verify that the lever is in the center or the OFF position.
9. Install the steering wheel to the steering column. Refer to Steering Wheel Replacement.

10. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Air Bags and Seat Belts.
11. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.
12. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Starting and Charging.

Sensors and Switches - Powertrain Management > < Turn Signal Cancel Can|Page 1094