Grand Prix V6-3.1L VIN J (2000)
3. Tighten
Tighten the power steering cooler pipe retaining clip bolt to 9.5 Nm (84 inch lbs.).
4. Install the power steering hoses to the power steering cooler pipe.
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
6. Lower the vehicle.
7. Fill the power steering system. Refer to Refilling the Power Steering System.
8. Bleed the power steering system. Refer to Bleeding Power Steering System.
9. Check the power steering system for leaks. Refer to Power Steering Gear and Pump Leaks.
10. Remove the drain pan from under the vehicle.
