Grand Prix V6-3.1L VIN J (2000)
2. Install the bolts which connect the strut to the knuckle.
Tighten the strut to knuckle bolts to 123 Nm (90 ft. lbs.).
3. Install the outer tie rod to the steering knuckle. Refer to Tie Rod End Replacement - Outer.
4. Connect the front lower control arm ball stud to knuckle. Refer to Lower Control Arm Replacement.
5. Install the front wheel drive shaft bearing. Refer to Front Wheel Drive Shaft Bearing Replacement.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
7. Lower the vehicle.
