Grand Prix V6-3.1L VIN J (2000)
Transmission Pressure Test Port: Service and Repair
Removal Procedure
1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the line the pressure pipe plug (38).
Installation Procedure
1. Apply GM P/N 8654382 to line pressure pipe plug.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the line pressure pipe plug (38).
^
Tighten the line pressure pipe plug (38) to 11 Nm (97 inch lbs.).
3. Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.