Grand Prix V6-3.8L (2007)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia Outer Support Replacement
Rear Bumper Fascia Outer Support Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the rear bumper fascia.
2. Remove the push-in retainers from the rear bumper fascia to the rear bumper fascia support. using J 38778.
3. Remove the rear bumper fascia support.
Installation Procedure
1. Install the rear bumper fascia support.
2. Install the push-in retainers attaching the rear bumper fascia to the rear bumper fascia support.
3. Install the rear bumper fascia.