Grand Prix V6-3.8L (2007)
Front Door Exterior Handle: Service and Repair
Handle Lock Rod Guide Block Replacement
HANDLE LOCK ROD GUIDE BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. IMPORTANT: This procedure covers the removal and installation of the front and the rear door.
Remove the front or rear door trim panel
2. Pull the rod (2) upward until it releases from the lock rod guide block (1).
3. Remove the lock rod guide block (1) from the door.
INSTALLATION PROCEDURE
1. Install the lock rod guide block (1) to the door.
2. Install the inside handle rod to the lock rod guide block (1) by pushing inward to secure the rod into the lock rod guide block.
3. Inspect the door for proper operation.
4. Install the front or rear door trim panel.