Grand Prix V6-3.8L (2007)
Front Door Panel: Service and Repair
Front Side Door Armrest Front Finish Cover and Rear Side Door Armrest Finish Cover Replacement
Front Side Door Armrest Front Finish Cover and Rear Side Door Armrest Finish Cover Replacement
Removal Procedure
Notice: The ball stud must not rotate during disassembly or reassembly. Hand tools must be used to keep the ball stud from rotating. If air tools
are used and the stud is allowed to rotate, damage to the ball stud and/or stud mounting hole may occur.
1. Insert a flat-bladed tool at the lower front edge of the cover.
2. Pry out to remove the cover from the handle.
Installation Procedure
1. Position the cover in the pull handle.
2. Press firmly to secure the cover.
