Grand Prix V6-3.8L (2007)
11. Remove the power window motor from the window regulator.
INSTALLATION PROCEDURE
1. Pre-start the bolts specified sequence (1, 2, 3) to the new window regulator and motor.
2. Install the power window motor to the window regulator.
3. Position the window regulator and motor into the locating slots of the inner door panel.
4. NOTE: Refer to Fastener Notice.
IMPORTANT: In order to ensure proper orientation of the window regulator to the door, tighten the window regulator bolts in the specified
sequence (1,2,3).
Install the window regulator and motor bolts in the specified sequence (1, 2, 3) to the door.
Tighten the bolts to 10 N.m (89 lb in).
5. Connect the electrical connector (2) to the power window motor by pushing in on the tab (1).
