Grand Prix V6-3.8L (2007)
1. Position the carpet in the vehicle. Reach under the carpet and feed the following connectors through the slits in the carpet where required:
*
The power seat adjusters
*
The seat belt pretensioner connector
*
The seat belt warning wire connector
2. Install the push-in retainers which hold the carpet on top of the rocker panels.
3. Carefully insert the carpet underneath the pedals.
4. Install the quarter lower trim.
5. Install the lower trim panel to the center pillar.
6. Install the carpet retainers.
7. Install the rear seat cushion.
8. Install the front floor console, if equipped.
9. Install the front seats.
