Grand Prix V6-3.8L (2007)
2. Install the floor console rear cover screws.
Tighten the screws to 2 N.m (18 lb in).
3. Install the floor console.
Front Floor Console Replacement
Front Floor Console Replacement
Removal Procedure
1. Apply the park brake.
2. Remove the floor console bolts from the sides of the console. Adjust the front seats as required.
3. Shift the transaxle to 2.
4. Remove the screw from the shift handle. Remove the shift handle.
5. Pull the floor console rearward slightly. Disconnect the electrical connector at the front of the floor console.
6. Remove the floor console.
7. Remove the wiring harness.
8. Remove the HUD switch, if equipped.
9. Remove the traction control switch.
10. Remove the accessory power receptacles.
11. Remove the armrest and the hinge.
Installation Procedure
