Grand Prix V6-3.8L (2007)
6. Pull out on the lower third of the quarter trim panel to disengage the clip (3).
7. Lift the bottom edge of the quarter panel until the panel is at a 45-degree angle.
8. Slide the panel down to disengage the top T-hook (1).
9. Remove the trim panel from the vehicle.
Installation Procedure
1. Position the rear quarter upper trim panel in the vehicle.
2. Holding the panel at a 45-degree angle, engage the top T-hook (1).
3. Slide the panel up to lock in the T-hook and rotate the panel to the proper position.
4. Press in the engage the lower retaining clip (3).
5. Install the sail panel.
6. Install the rear quarter lower trim panel.
7. Install the door weather-strip.
8. Install the rear seat back.
9. Install the rear seat cushion.
Rear Window Shelf Trim Panel Replacement
Rear Window Shelf Trim Panel Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Lower the folding rear seat back.
