Grand Prix V6-3.8L (2007)
Power Mirror Motor: Service and Repair
OUTSIDE REAR VIEW MIRROR MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the mirror face.
2. Remove the screws from the mirror motor.
3. Disconnect the electrical connectors from the rear of the mirror motor. Note the position of the plugs on the mirror motor when removing.
4. Remove the motor.
INSTALLATION PROCEDURE
1. Position the motor to the mirror housing.
2. Connect the electrical connector to the rear of the mirror motor.
3. NOTE: Refer to Fastener Notice.
Install the screws to the mirror motor.
Tighten the screws to 2 N.m (18 lb in).
4. Install the mirror face to the mirror housing.
5. Inspect the mirror for proper operation.
