Grand Prix V6-3.8L (2007)
Install the child seat latch bracket bolts (2) to each end of the latch bracket.
Tighten the latch bracket nut and bolts to 42 N.m (31 lb ft).
5. Install the rear center seat belts.
6. Fold the rear seat back cushions down.
7. Install the rear seat latches to the rear seat back.
8. Install the rear seat back anchor bolts to the rear seat latches.
Tighten the rear seat back latch bolts to 10 N.m (89 lb in).
9. Fold the rear seat back cushions up.
10. Inspect the rear seat for proper operation.
11. Install the rear seat cushion.
Seat Back Bolster Replacement - Rear Split Folding
Seat Back Bolster Replacement - Rear Split Folding
Removal Procedure
1. Remove the rear seat back.
2. Remove the push-in J-hook retainers from both rear seat bolsters.
3. Pull back the trim on the right bolster in order to expose the rear compartment release handle cable, if equipped.
4. Reposition the compartment release handle cable from the right seat bolster, if equipped.
