Grand Prix V6-3.8L (2007)
3. Install the right and left engine cooling fan blade.
4. Install the right and left engine cooling fan blade nut.
Tighten the nuts to 6 N.m (53 lb in).
5. Install the transmission oil cooler line retaining clip to the bottom of the fan shroud.
6. Install the engine cooling fan motor heat shield.
7. Install the engine cooling fan motor heat shield push in retainers.
8. Install the cooling fan motors electrical harness retaining clips to the fan shroud.
Important: Ensure the lower edge of the fan shroud engages the clip at the bottom of the radiator.
9. Install the cooling fan shroud.
10. Install the cooling fan shroud bolts.
