Grand Prix V6-3.8L (2007)
Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Motor Replacement - Electric (RPOs L26, L32)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
Caution: Keep hands, tools, and clothing away from the electric engine coolant fans in order to help prevent personal injury. These fans
are electric and can turn on whether or not the engine is running. The fans can start automatically with the ignition in the ON position.
Caution: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away
from any underhood electric fan.
Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be
replaced.
Caution: Before servicing any electrical component, the ignition and start switch must be in the OFF or LOCK position and all electrical
loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live
exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury
and/or damage to the vehicle or its components.
1. Disconnect the negative battery cable.
2. Remove the left and right engine mount struts.
3. Remove the air cleaner assembly.
4. Remove the PCM harness retainer from the fan shroud.
5. Remove the transmission oil cooler lines from the lower fan shroud clip and reposition the oil cooler lines aside.
6. Remove the fan shroud clip from the condenser tubes.
7. Remove the radiator upper bracket bolts and brackets.
