Grand Prix V6-3.8L (2007)
6. Install the lower connecting rod bearing to the connecting rod cap.
7. Install the connecting rod cap.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the connecting rod cap bolts.
1. Tighten the connecting rod cap bolts to 27 N.m (20 lb ft).
2. Use the J 45059 to rotate the connecting rod cap bolts an additional 50 degrees.
9. Pry the connecting rod back and forth in order to check for binding. If necessary, loosen and then retighten the connecting rod cap bolts.
