Grand Prix V6-3.8L (2007)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement (RPOs L26/L32)
Removal Procedure
1. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor (1).
2. Remove the negative battery cable.
3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
4. Squeeze the negative battery cable branches together.
Important: Note the position of the battery current sensor prior to removal.
5. Slide the battery current sensor (1) off of the negative battery cable.
Installation Procedure