Grand Prix V6-3.8L (2007)
6. Remove the positive battery cable junction block lead nut (1).
7. Remove the positive battery cable (2) from the bussed electrical center (BEC).
8. Remove the BEC (3) from the strut tower.
9. Un-clip and remove the positive battery cable harness from the BEC.
10. Raise and support the vehicle. Refer to Vehicle Lifting in General Information.
11. Remove the front lower air deflector.
12. Remove the positive battery cable nut (2) from the starter.
13. Remove the positive battery cable (3) from the starter motor BAT terminal.
14. Remove the transaxle stud nut (5).
15. Remove the engine ground cable (6) from the transaxle stud.
16. Un-clip and remove the battery cable harness from the retainers.
17. Remove the battery cable harness from the vehicle.
18. Carefully cut the tape on the wiring harness conduit.
19. Remove the negative battery cable from the wiring harness conduit.
